Skip to main content

Authorization request

Note: Work in progress!

The process of requesting the authorization to perform operations on a set of resources. The custodian must check if all the requirements are met, therfore the response will be a-sync.

Relevant standards

Terms

The following information is needed:

scope The scope of the authorization request. In case of patient data, a patient identifier such as a BSN should be provided.

custodian Party who has the legal obligation to keep the data safe and only share under certain conditions.

requestor Party who wants to perform the operations on the data.

Use-case

A GP wants to read a report about a patient written by a care giver at another care organization (custodian). The GP requests access to this report(scope). The custodian needs a patient consent in order to grant this request. It will look into its own consent system(s) to find it. If it is there, the GP receives an authorization in the form of a AuthorizationCredential.

Implementing using the OIDC4VCI credential request

We will base the implementation based on the new OpenID Connect standard. This way wallets and issuers will interact in a standardized way which makes this solution interoperabel with other wallets and issuers.

The interactions are shown in the following diagram:

The issuer is the Custodian and the Holder is the Requestor (GP in our use-case example).

Let's walk through all the steps:

Credential Request

The goal for this group is the Requestor asking the Custodian for authorization to a specific (set of) resources. The authorization will be given in the form of a credential. This credential can later be used to aquire an access_token for the actual resource.

So why not directly issue an access_token for the resource instead? Multiple reasons:

  1. The authorization request might take some time to process. An actual person might need to check the request for example. The OIDC4CI standard provides a flow for this, a normal OIDC flow doesn't.
  2. The AuthorizationCredential is issued to the organization, but the access_token should be bound to a user. So, for each user session, a new access_token coupled to a verifiable user identity should be issued.
  3. Access tokens should be short lived, after they are issued it is no longer possible for the resource server to challenge the holder if it was the original requestor.

1. The requestor performs an AuthorizationRuest.

This is described in 5.1. Using the authorization_details:

[{
   "type":"openid_credential",
   "format": "ldp_vc",
   "credential_definition": {
      "@context": [
         "https://www.w3.org/2018/credentials/v1",
         "https://nuts.nl/credentials/v1"
      ],
      "types": [
         "VerifiableCredential",
         "NutsAuthorizationCredential"
      ],
      "credentialSubject": {
         "id": "did:nuts:123",
         "purposeOfUse": "careviewer",
         "patient":"bsn:9999992"
      }
   }
}]

Example request:

GET /authorize?
  response_type=code
  &client_id=s6BhdRkqt3
  &code_challenge=E9Melhoa2OwvFrEMTJguCHaoeK1t8URWbuGJSstw-cM
  &code_challenge_method=S256
  &authorization_details=%5B%7B%22type%22%3A%22openid_credential%22%2C%22format%22%3A%22ldp_vc%22%2C%22credential_definition%22%3A%7B%22%40context%22%3A%5B%22https%3A%2F%2Fwww.w3.org%2F2018%2Fcredentials%2Fv1%22%2C%22https%3A%2F%2Fnuts.nl%2Fcredentials%2Fv1%22%5D%2C%22types%22%3A%5B%22VerifiableCredential%22%2C%22NutsAuthorizationCredential%22%5D%2C%22credentialSubject%22%3A%7B%22id%22%3A%22did%3Anuts%3A123%22%2C%22purposeOfUse%22%3A%22careviewer%22%2C%7D%7D%7D%5D
  &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb
Host: https://server.example.com

Dynamic Credential Request

The issuer wants to know proofs about the validity of the request. Using the dynamic credential request, as defined in section 5.

Steps 2 - 6

These steps are asking the requestor for additional proofs (VCs) about its identity and capabilities. The issuers sends a challenge and the holder embeds the VCs in a Verifiable presentation.

7. Authorization Response

The Authorization Server has received the request, creates "session" identified by a code and redirects the user-agent to the callback, providing the code in the request parameter.

Example Response:

HTTP/1.1 302 Found
  Location: https://client.example.org/cb?
    code=SplxlOBeZQQYbYS6WxSbIA

After checking the identity and additional claims of the requestor, the issuer has to check if the request can be allowed. One of the things to check is the legal basis. Depending on the use-case different legal-basis are relevant. This example shows an emergency and an explicit consent provided by the patient. There exists other legal basis which are not shown in this example.

These steps might be almost instantaneously or take hours or days, depending on the use-case and possible manual checks. Meanwhile the wallet will start polling and retrying based on the interval response from the AS.

Steps 8 to 12 describe the flow where a consent is the legal basis.

The custodian has the responsibility to administer pateint consent for sharing data. The custodian has to check its administration if there is a consent.

This request must be standardize so all consent systems can support the API and make integrations between Authorization Servers and consent systems universal.

10. The Authorization Server allows the request

After receiving positive confirmation from the consent system, the AS registers this request as valid.

Steps 11 - 12 No consent

13. Emergency

This is an example where an emergency can be a legal basis. The request is logged and allowd instantaneously.

Get access_token

After step 7, when the wallet receives the authorization code, the wallets starts polling the token endpoint for the access_token.

14. GET AS/token?code

The wallet tries to get the access_token from the token endpoint. According to OPIDC4VCI section 6.1

POST /token HTTP/1.1
Host: server.example.com
Content-Type: application/x-www-form-urlencoded
Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW

  grant_type=authorization_code
  &code=SplxlOBeZQQYbYS6WxSbIA
  &code_verifier=dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk
  &redirect_uri=https%3A%2F%2FWallet.example.org%2Fcb

Note: the value of the Authorization header must be specified. Probably based on RFC7523

HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store

  {
      "authorization_pending": true,
      "interval": 300
  }
HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store

  {
    "access_token": "eyJhbGciOiJSUzI1NiIsInR5cCI6Ikp..sHQ",
    "token_type": "bearer",
    "expires_in": 86400,
    "c_nonce": "tZignsnFbp",
    "c_nonce_expires_in": 86400
  }

OIDC4VCI section 6.3 There was nog valid legal basis, the token endpoint responsds with an error response:

HTTP/1.1 400 Bad Request
Content-Type: application/json
Cache-Control: no-store

{
   "error": "legal basis invalid"
}

Note: this should be specified in more detail.

18. Get credential

Using the access_token and the n_once, the wallet can request the credential:

POST /credential HTTP/1.1
Host: server.example.com
Content-Type: application/json
Authorization: BEARER czZCaGRSa3F0MzpnWDFmQmF0M2JW

{
   "format": "ldp_vc",
   "credential_definition": {
      "@context": [
         "https://www.w3.org/2018/credentials/v1",
         "https://nuts.nl/credentials/v1"
      ],
      "types": [
         "VerifiableCredential",
         "NutsAuthorizationCredential"
      ],
      "credentialSubject": {
         "id": "did:nuts:123",
         "purposeOfUse": "careviewer",
         "patient":"bsn:9999992"
      }
   },
   "proof": {
      "proof_type": "jwt",
      "jwt": "eyJraWQiOiJkaWQ6ZXhhbXBsZ...KPxgihac0aW9EkL1nOzM"
   }
}

Note: the value of the Authorization header must be specified. Probably based on RFC7523

19. Credential response

HTTP/1.1 200 OK
Content-Type: application/json
Cache-Control: no-store

{
    "format": "ldp_vc",
    "credential": {
        "@context": [
            "https://www.w3.org/2018/credentials/v1",
            "https://nuts.nl/credentials/v1"
        ],
        "id": "did:web:issuer#123",
        "type": [
            "VerifiableCredential",
            "NutsAuthorizationCredential"
        ],
        "issuer": "did:web:custodian",
        "issuanceDate": "2010-01-01T00:00:00Z",
        "credentialSubject": {
            "id": "did:web:requestor",
            "patient":"bsn:999992",
            "purposeOfUse": "careviewer",
        },
        "proof": {
            "type": "Ed25519Signature2020",
            "created": "2022-02-25T14:58:43Z",
            "verificationMethod": "https://example.edu/issuers/565049#key-1",
            "proofPurpose": "assertionMethod",
            "proofValue": "zeEdUoM7m9cY8ZyTpey83yBKeBcmcvbyrEQzJ19rD2UXArU2U1jPGoEt
                           rRvGYppdiK37GU4NBeoPakxpWhAvsVSt"
        }
    },
    "c_nonce": "fGFF7UkhLa",
    "c_nonce_expires_in": 86400
}